Commit e8ee6fb0 authored by insult's avatar insult
Browse files

Lagt til keepoutsoner

Lagt til en decoupling cap (trenger flere)
Lagt til monteringshull i hjørnene
parent 3fcdc185
Protel Design System Design Rule Check
PCB File : O:\brukere\tesla\Tesla-Driver\05_Hardware\TK500_Driver\TK530_Kraftbakplan\TK530_Kraftbakplan.PcbDoc
Date : 20.02.2015
Time : 18:38:25
PCB File : Z:\brukere\tesla\Tesla-Driver\05_Hardware\TK500_Driver\TK530_Kraftbakplan\TK530_Kraftbakplan.PcbDoc
Date : 23.06.2015
Time : 18:15:06
Processing Rule : Short-Circuit Constraint (Allowed=No) (All),(All)
Processing Rule : Room Keepoutroom1_1 (Bounding Region = (50mm, 50mm, 250mm, 70mm) (not InComponentClass('Holders') or IsNet)
Rule Violations :0
Processing Rule : Un-Routed Net Constraint ( (All) )
Processing Rule : Room Keepoutroom1 (Bounding Region = (50mm, 130mm, 250mm, 150mm) (not InComponentClass('Holders') or IsNet or OnLayer('Bottom'))
Rule Violations :0
Processing Rule : Clearance Constraint (Gap=0.16mm) (All),(All)
Processing Rule : Modified Polygon (Allow modified: No), (Allow shelved: No)
Rule Violations :0
Processing Rule : Power Plane Connect Rule(Relief Connect )(Expansion=0.508mm) (Conductor Width=1mm) (Air Gap=0.254mm) (Entries=4) (All)
Processing Rule : Net Antennae (Tolerance=0mm) (All)
Rule Violations :0
Processing Rule : Width Constraint (Min=0.16mm) (Max=10mm) (Preferred=0.4mm) (All)
Processing Rule : Silk primitive without silk layer
Rule Violations :0
Processing Rule : Height Constraint (Min=0mm) (Max=200mm) (Prefered=12.7mm) (All)
Processing Rule : Silk to Silk (Clearance=0.254mm) (All),(All)
Rule Violations :0
Processing Rule : Hole Size Constraint (Min=0.3mm) (Max=6.35mm) (All)
Processing Rule : Silk To Solder Mask (Clearance=0.178mm) (IsPad),(All)
Rule Violations :0
Processing Rule : Minimum Solder Mask Sliver (Gap=0.1mm) (All),(All)
Rule Violations :0
Processing Rule : Hole To Hole Clearance (Gap=0.254mm) (All),(All)
Rule Violations :0
Processing Rule : Minimum Solder Mask Sliver (Gap=0.1mm) (All),(All)
Processing Rule : Hole Size Constraint (Min=0.3mm) (Max=6.35mm) (All)
Rule Violations :0
Processing Rule : Silk To Solder Mask (Clearance=0.178mm) (IsPad),(All)
Processing Rule : Height Constraint (Min=0mm) (Max=200mm) (Prefered=12.7mm) (All)
Rule Violations :0
Processing Rule : Silk to Silk (Clearance=0.254mm) (All),(All)
Processing Rule : Width Constraint (Min=0.16mm) (Max=10mm) (Preferred=0.4mm) (All)
Rule Violations :0
Processing Rule : Silk primitive without silk layer
Processing Rule : Power Plane Connect Rule(Relief Connect )(Expansion=0.508mm) (Conductor Width=1mm) (Air Gap=0.254mm) (Entries=4) (All)
Rule Violations :0
Processing Rule : Net Antennae (Tolerance=0mm) (All)
Processing Rule : Clearance Constraint (Gap=0.16mm) (All),(All)
Rule Violations :0
Processing Rule : Modified Polygon (Allow modified: No), (Allow shelved: No)
Processing Rule : Un-Routed Net Constraint ( (All) )
Rule Violations :0
Processing Rule : Short-Circuit Constraint (Allowed=No) (All),(All)
Rule Violations :0
......
......@@ -222,7 +222,7 @@
</script><title>Design Rule Verification Report</title>
</head>
<body onload=""><img ALT="Altium" src="
file://D:\Altium Shared\AD15\Templates\AD-rgb_logo_223x64.gif
file://C:\Users\Public\Documents\Altium\AD15\Templates\AD-rgb_logo_223x64.gif
"><a href="dxpprocess://Client:SetupPreferences?Server=PCB|PageName=Reports" class="customize"><acronym title="dxpprocess://Client:SetupPreferences?Server=PCB|PageName=Reports">customize</acronym></a><h1>Design Rule Verification Report</h1>
<table class="header_holder">
<td Style="width:70%">
......@@ -230,12 +230,12 @@
<tr class="front_matter">
<td class="front_matter_column1">Date</td>
<td class="front_matter_column2">:</td>
<td class="front_matter_column3">20.02.2015</td>
<td class="front_matter_column3">23.06.2015</td>
</tr>
<tr class="front_matter">
<td class="front_matter_column1">Time</td>
<td class="front_matter_column2">:</td>
<td class="front_matter_column3">18:38:25</td>
<td class="front_matter_column3">18:15:06</td>
</tr>
<tr class="front_matter">
<td class="front_matter_column1">Elapsed Time</td>
......@@ -245,7 +245,7 @@
<tr class="front_matter">
<td class="front_matter_column1">Filename</td>
<td class="front_matter_column2">:</td>
<td class="front_matter_column3"><a href="file:///O:\brukere\tesla\Tesla-Driver\05_Hardware\TK500_Driver\TK530_Kraftbakplan\TK530_Kraftbakplan.PcbDoc" class="file"><acronym title="O:\brukere\tesla\Tesla-Driver\05_Hardware\TK500_Driver\TK530_Kraftbakplan\TK530_Kraftbakplan.PcbDoc">O:\brukere\tesla\Tesla-Driver\05_Hardware\TK500_Driver\TK530_Kraftbakplan\TK530_Kraftbakplan.PcbDoc</acronym></a></td>
<td class="front_matter_column3"><a href="file:///Z:\brukere\tesla\Tesla-Driver\05_Hardware\TK500_Driver\TK530_Kraftbakplan\TK530_Kraftbakplan.PcbDoc" class="file"><acronym title="Z:\brukere\tesla\Tesla-Driver\05_Hardware\TK500_Driver\TK530_Kraftbakplan\TK530_Kraftbakplan.PcbDoc">Z:\brukere\tesla\Tesla-Driver\05_Hardware\TK500_Driver\TK530_Kraftbakplan\TK530_Kraftbakplan.PcbDoc</acronym></a></td>
</tr>
</table>
</td>
......@@ -262,7 +262,7 @@
</table>
</td>
</table>
<hr><a name="IDASAYQB"><h2>Summary</h2></a><table>
<hr><a name="IDASA4WB"><h2>Summary</h2></a><table>
<tr>
<th class="column1">Warnings</th>
<th class="column2">Count</th>
......@@ -277,59 +277,67 @@
<th class="column2">Count</th>
</tr>
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
<td class="column1"><a href="#IDAEBYQB">Short-Circuit Constraint (Allowed=No) (All),(All)</a></td>
<td class="column1"><a href="#IDAEB4WB">Room Keepoutroom1_1 (Bounding Region = (50mm, 50mm, 250mm, 70mm) (not InComponentClass('Holders') or IsNet)</a></td>
<td class="column2">0</td>
</tr>
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
<td class="column1"><a href="#IDAKBYQB">Un-Routed Net Constraint ( (All) )</a></td>
<td class="column1"><a href="#IDAKB4WB">Room Keepoutroom1 (Bounding Region = (50mm, 130mm, 250mm, 150mm) (not InComponentClass('Holders') or IsNet or OnLayer('Bottom'))</a></td>
<td class="column2">0</td>
</tr>
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
<td class="column1"><a href="#IDAQBYQB">Clearance Constraint (Gap=0.16mm) (All),(All)</a></td>
<td class="column1"><a href="#IDAQB4WB">Modified Polygon (Allow modified: No), (Allow shelved: No)</a></td>
<td class="column2">0</td>
</tr>
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
<td class="column1"><a href="#IDAWBYQB">Power Plane Connect Rule(Relief Connect )(Expansion=0.508mm) (Conductor Width=1mm) (Air Gap=0.254mm) (Entries=4) (All)</a></td>
<td class="column1"><a href="#IDAWB4WB">Net Antennae (Tolerance=0mm) (All)</a></td>
<td class="column2">0</td>
</tr>
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
<td class="column1"><a href="#IDA2BYQB">Width Constraint (Min=0.16mm) (Max=10mm) (Preferred=0.4mm) (All)</a></td>
<td class="column1"><a href="#IDA2B4WB">Silk primitive without silk layer</a></td>
<td class="column2">0</td>
</tr>
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
<td class="column1"><a href="#IDACCYQB">Height Constraint (Min=0mm) (Max=200mm) (Prefered=12.7mm) (All)</a></td>
<td class="column1"><a href="#IDACC4WB">Silk to Silk (Clearance=0.254mm) (All),(All)</a></td>
<td class="column2">0</td>
</tr>
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
<td class="column1"><a href="#IDAICYQB">Hole Size Constraint (Min=0.3mm) (Max=6.35mm) (All)</a></td>
<td class="column1"><a href="#IDAIC4WB">Silk To Solder Mask (Clearance=0.178mm) (IsPad),(All)</a></td>
<td class="column2">0</td>
</tr>
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
<td class="column1"><a href="#IDAOCYQB">Hole To Hole Clearance (Gap=0.254mm) (All),(All)</a></td>
<td class="column1"><a href="#IDAOC4WB">Minimum Solder Mask Sliver (Gap=0.1mm) (All),(All)</a></td>
<td class="column2">0</td>
</tr>
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
<td class="column1"><a href="#IDAUCYQB">Minimum Solder Mask Sliver (Gap=0.1mm) (All),(All)</a></td>
<td class="column1"><a href="#IDAUC4WB">Hole To Hole Clearance (Gap=0.254mm) (All),(All)</a></td>
<td class="column2">0</td>
</tr>
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
<td class="column1"><a href="#IDA0CYQB">Silk To Solder Mask (Clearance=0.178mm) (IsPad),(All)</a></td>
<td class="column1"><a href="#IDA0C4WB">Hole Size Constraint (Min=0.3mm) (Max=6.35mm) (All)</a></td>
<td class="column2">0</td>
</tr>
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
<td class="column1"><a href="#IDAADYQB">Silk to Silk (Clearance=0.254mm) (All),(All)</a></td>
<td class="column1"><a href="#IDAAD4WB">Height Constraint (Min=0mm) (Max=200mm) (Prefered=12.7mm) (All)</a></td>
<td class="column2">0</td>
</tr>
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
<td class="column1"><a href="#IDAGDYQB">Silk primitive without silk layer</a></td>
<td class="column1"><a href="#IDAGD4WB">Width Constraint (Min=0.16mm) (Max=10mm) (Preferred=0.4mm) (All)</a></td>
<td class="column2">0</td>
</tr>
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
<td class="column1"><a href="#IDAMDYQB">Net Antennae (Tolerance=0mm) (All)</a></td>
<td class="column1"><a href="#IDAMD4WB">Power Plane Connect Rule(Relief Connect )(Expansion=0.508mm) (Conductor Width=1mm) (Air Gap=0.254mm) (Entries=4) (All)</a></td>
<td class="column2">0</td>
</tr>
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
<td class="column1"><a href="#IDASDYQB">Modified Polygon (Allow modified: No), (Allow shelved: No)</a></td>
<td class="column1"><a href="#IDASD4WB">Clearance Constraint (Gap=0.16mm) (All),(All)</a></td>
<td class="column2">0</td>
</tr>
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
<td class="column1"><a href="#IDAYD4WB">Un-Routed Net Constraint ( (All) )</a></td>
<td class="column2">0</td>
</tr>
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
<td class="column1"><a href="#IDA4D4WB">Short-Circuit Constraint (Allowed=No) (All),(All)</a></td>
<td class="column2">0</td>
</tr>
<tr>
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment